AeroShell Grease 64 (Formerly 33MS) - 14 Oz Tube

Description

Shell Aviation offers a range of aviation greases designed to fill almost every lubrication need of the aviation community.AeroShell Grease 5Mineral Grease for AircraftWheel bearing and engine accessory greaseMicrogel thickened, mineral oil baseMeets MIL-G-3545CP/N 08-05455Combines high load-carrying ability with excellent resistance to water and high temperatures. It inhibited against corrosion and oxidation, and has a useful temperature range of -23°C to + 177°C. Used primarily in aircraft wheel bearings and engine accessories operating at high speeds and relatively high temperatures.AeroShell Grease 6General Purpose Airframe GreaseMicrogel thickened, mineral oil baseApproved MIL-PRF-24139AP/N 08-05460Inhibited against corrosion and oxidation, it features outstanding low temperature torque properties and resistance to water. Useful temperature range of -40°C to +121°C. Used primarily in plain and anti-friction bearings on general aviation aircraft.AeroShell Grease 7Synthetic Grease for AircraftAdvanced multipurpose airframe greaseMicrogel thickened, synthetic diester oil baseApproved MIL-PRF-23827CP/N 08-05475Corrosion inhibited and fortified to resist oxidation, it combines excellent load-carrying capacity with a useful temperature range of -73°C to + 149°C. Recommended for highly loaded gears and actuator screw mechanisms, as well as for instrument and general airframe lubrication.AeroShell Grease 14Mineral Grease for HelicoptersLeading multipurpose helicopter greaseCalcium soap thickened, mineral oil baseMeets MIL-G-25537CP/N 08-05480Inhibited against corrosion and oxidation, it is compounded with special anti-rust additives, and gives outstanding protection against fretting and moisture corrosion. Useful temperature range is -54°C to +93°C. Approved by all leading helicopter manufacturers. Recommended for most helicopter main and tail rotor bearings; widely used as a general purpose helicopter grease.AeroShell Grease 22Synthetic Grease for AircraftVersatile multipurpose greaseMicrogel thickened, synthetic hydrocarbon oil baseApproved MIL-PRF-81322GP/N 08-05490Corrosion inhibited and fortified against oxidation, it has excellent anti-wear properties, load-carrying capacity and water resistance, plus a wide useful temperature range of -65°C to +240°C. Recommended for aircraft wheel bearings, engine accessories and airframe lubrication, and for anti-friction bearings operating at high speeds and at high or low temperatures.AeroShell Grease 33Synthetic Lithium Complex Grease for AircraftUniversal airframe greaseLithium complex thickened,synthetic hydrocarbon/ester oil baseApproved MIL-PRF-23827C Type 1P/N 08-00825Developed with the purpose of satisfying almost all airframe lubrication requirements with a single grease. Its enhanced corrosion resistance and load-carrying capacity reduces wear and tear and can lead to extension of re-greasing intervals and reduction in maintenance costs. Replacing several greases with a single grease avoids the risk of misapplication and also reduces stock inventory, again providing cost savings. Useful temperature range is -73°C to +121°C.AeroShell Grease 64Synthetic Grease for Aircraft Containing Molybdenum DisulfideAn extreme pressure (EP) greaseMeets MIL-G-21164DP/N 08-00824Extreme-Pressure Airframe GreaseAeroShell Grease 64 is an EP airframe grease based on the proven lithium thickener technology of AeroShell Grease 33. It can help to extend component life through its exceptional load-carrying and EP properties from fortification using 5% molybdenum disulphide and its excellent wear and corrosion protection. It also helps to reduce the risk of product misapplication by being fully compatible with AeroShell Grease 33. Together, these greases are perfect partners, thereby helping to reduce costs by protecting over 98% of the grease application points on a typical airliner.Benefits at a glanceLonger component life through exceptional load-carrying and extreme pressure properties from its for