Skip to content
PLANEFILE

Vans AircraftExperimental & kit · Dayton/Phillipsburg, Ohio, USA

2026 Vans RV-14A

Price
$414,900
Year
2026
Total time
53 hours
Location
United States

Specifications

General

Sale Status
For Sale
Make/Model
VANS RV-14A
Registration #
C-GXIV
Serial #
140988
Total time
53
Engine 1 Time
53 SNEW
Prop 1 Time
53 SNEW
Useful Load
742 lb
Condition
Used
Flight Rules
IFR

Airframe

Airframe Total Time
53

Engine

Engine Total Time
53

Propeller

Prop Time
53

Avionics

Avionics List
ADS-B In and Out (Traffic and Weather displays on panel and iPad via Bluetooth)
Equipment List
2026 Model Vans RV-14A: 25 hours of testing completed May 2026

Flight Director

Gamin G5 Standby Attitude Indicator

Garmin 2-Place Intercom

Garmin Aera 760 MFD in AirGizmos Panel Mount Cradle

Garmin FliteCharts

Garmin G3X Touch Suite with SmartGlide and Radar Altimeter (Garmin GHA15)

Garmin GA57X GPS/SXM and GA35 GPS Antennas

Garmin GAP26 Heated Pitot/AOA Tube

Garmin GDU 460 10.6" Landscape PFD with Synthetic Vision (SVX)

Garmin GEA24 EIS interfaced with G3X Suite - Oil Temp/Oil Pressure/EGT/CHT/Fuel Flow/Volts/Amps

Garmin GMA245R Remote Mount Audio Panel

Garmin GMC507 2-Axis Autopilot with Dual GSA28 AP Servos

Garmin GMU11 Magnetometer & GTP59 OAT Probe

Garmin GNC255 NAV/COMM

Garmin GTN750xi GPS/NAV/COMM/WAAS

Garmin GTX 345R Remote Mount Transponder with ADS-B In/Out and Diversity

TAWS Terrain Awareness

Professional Build Finish and Sign-off by EA Structures a renowned owner assist facility in British Columbia (click this link for more info)

215 h.p. Lycoming YIO-390 EXP 292 Thunderbolt Engine (Custom painted red and black with stainless steel covers)

Dual E-Mag electronic ignition with air cooling and installed test switches on the Avionics panel to confirm internal power generation while running

Cooling shroud covering with air ducts for the fuel pump mounted on the engine

Gascolater at the lowest point with air cooling arrangement to avoid fuel vapor lock

Three blade constant speed MT Propeller with hydraulic actuation

Light weight higher power EarthX ETX 900 battery with battery charging outlet in the engine compartment

Upper Cowling with flush head Skybolt quarter turn fasteners on the top row for quick removal

Stainless Steel cowl pin covers with RV-14A marking for the longitudinal side pins

Twin forward fuselage access panels installed for Inspection on the hood

Firewall forward hose kit from Aircraft Specialties for fuel lines in the engine compartment

Aircraft specialty kit installed that has stainless steel preformed rigid custom made tubes and hoses for fuel lines from the tanks to fuel booster pump and through firewall to gascolator and to the fuel pump on the engine

Stainless steel braided hoses for oil lines inside the engine compartment

Complete plumbing for a 25 to 35 gallon collapsible ferry tank on the copilot seat to the right fuel tank that is kept sealed for future use

Smoke System Helper Custom 5 Gallon tank with pipelines, check valves, manual valve, pump and nozzles installed at the engine exhausts for aerobatic release of smoke with a switch on the avionics panel while using quality smoke oil without spills

Custom Garmin IFR Avionics panel built by Aerotronics in Billings, MT (see avionics list below for full specs)

IFR Certification will need to be applied for

Premium Glare shield with LED day and night lights package from Aircraft Specialty installed

Easy exit foot step bars and load carrying centre console support installed to facilitate easy exit from the aircraft

Handbrake and Pilot relief installed on the left seat side to facilitate continuous long flights

Flight control column stick with Superior Tosten grip that has all control buttons

Emergency Remote Canopy Release kit with safety lock and marking installed with access from inside the plane

Plexiglass breaker installed on the centre console incase required during any emergency

Custom made seats with six cooling fans installed for both pilot and copilot with 3 speed control switches

Custom Rudder pedal extensions from JD Air parts installed on all four rudder pedals for better grip and reach

Garmin Virb Ultra 30 camera as primary for the cabin is installed with power supply for charging continuously while the master is on. Another Virb Ultra 30 camera as extended verb installed under the right wing that needs charging before any use

Twist lock cup holder with cup and pen holder to facilitate aerobatic moves without spillage or drop

Custom made carpets and side panels with pockets installed inside the cabin and the luggage compartment

Crow safety gear 5-point harnesses installed for both pilot and copilot seats

JD Air parts custom tip up canopy latch (anodized red color) installed

Luggage tie down hooks installed in the luggage compartment

Diversity remote transponder GTX 345 DR for ADS-B In and Out installed inside the tail cone with two antennas for ground and satellite access automatically as needed

Twin Static air ports on both sides of the tailcone installed

Radar Altimeter Installed (Garmin Height Advisor GHA15)

Koger sliding sunshade on rail installed inside canopy to reduce heat and provide shade

Individual wing root fuel filters on both wing fuel tank outlets to the fuel pump installed with locked shut off valves

Fuel tank caps with locks, blue anodized vent fairings as well as silver drain fairings installed

Heated Pitot / AOA probe installed on the underside of the left wing

Bob Archer sports aircraft VOR antenna installed on the tip of the left wing

Independent Flyleds LED lights with heat sink for Taxi lights on both wings installed

Jacking pin holes provided on both landing gear wheels inside to facilitate tire replacement

Tow bar insert metal reinforcement as well as valve stem access for the tire provided on the nose wheel pant

Exotic custom paint scheme by EVOKE that is painted by Cascade Custom Designers in Bend Oregon

Tail emblem and the registration numbers are vinyl application and can be replaced without damaging the original paint on the plane

Tools and accessories include safety kit, jack point, fuel check, fuel dip stick, complete auto control battery charger from EarthX, cover for the aircraft, toe bar, funnel, seat cushions, custom tie ropes, external gust locks for all three control surfaces, screwdriver and multiple pliers

ACK E-04 406MHz ELT

USB Charging Ports Installed

60-amp Alternator Installed

Two-Po

Interior

Custom made two-tone black and beige seats with six cooling fans installed for both pilot and copilot with 3 speed control switches. Interior is rounded out with black leather trim and carpeting with ample and thoughtful storage throughout.

Exotic custom paint scheme by EVOKE painted by Cascade Custom Designers in Bend, Oregon. Scheme is a gorgeous candy apple red metallic over white with black trim. Tail decal and registration marks are in vinyl for easy transfer to new registration and removal/change of the tail emblem.

Remarks

Annual Due
2/2027
Location
3I7 / Phillipsburg, OH

Detailed Description

2026 Vans RV-14A - C-GXIV. Once you are done marveling... say hello to one of the best and most decked out Vans RV-14A builds on the planet!

The current owner is a Canadian Professional Engineer. He was the primary builder of the aircraft and began the project with the goal to fly it around the world on a formal Earth Rounders trip launching from EAA AirVenture Oshkosh 2026. While he made the trip to OSH, given the current geo-political climate he has decided to put the round-the-world plans on hold and part ways with the plane. The total cost of this build was over $375K USD, without any labor costs considered.

Following initial completion of the project in May 2025, the seller attempted a post-construction maiden flight. From a height of 10-20 feet AGL, the seller noted that the aircraft was not making ample power and attempted to land on the remaining runway. The landing was nosewheel first followed by subsequent oscillations, a runway excursion, and damage to the aircraft. Since the May 2025 incident, it was determined that the ignition system that was shipped to him was faulty. That issue was corrected and no damaged part was repaired. Each and every damaged part was replaced with an original part from the Van's Aircraft factory. Final finishing touches were then made with the assistance of EA Structures, a renowned and quality build center in British Columbia. Initial 25 hours of flight testing was conducted and completed in April 2026 from EA Structures at Chilliwack Airport in British Columbia. Since then the owner has made several training and personal flights including the AirVenture trip. It is currently hangar kept at our facility in Phillipsburg, OH while listed for sale. Until under contract, the seller will be flying it on his regular visits with his daughter who lives and works in Dayton, thus flight hours may increase slightly while on-market.

This build is a thing of beauty and is impressive in every way. The aircraft is available not only to Canadian buyers but to buyers in the US and beyond as well. The seller will assist with the straightforward import process every step of the way. Price is in USD.

Remarks

All representations in this advertisement are made by Seller. The seller has not inspected the aircraft or its logbooks, and strongly suggests that any Buyer arrange for a comprehensive pre-buy inspection of the same.

Aircraft record

C-GXIV

Registration

Registration
C-GXIV
Registered as
Sreekumar Nair RV-14A
Year
2021
Serial number
140988
Registered since
2024-08-26
Status
Registered

Accidents and incidents

2026-09-05
Incident, Mexico · damage: substantial · injuries: yes · A26F0303

More RV-14A for sale

All RV-14A for sale